Journals

1	Yuichi Sato and Shigeru Fujii: Local stresses and crack displacements in reinforced concrete elements, Journal of Structural Engineering, ASCE, Vol.128, Issue 10, pp.1263-1271, 2002.
2	Yuichi Sato and Frank J. Vecchio: Tension Stiffening and Crack Formation in Reinforced Concrete Members with Fiber-Reinforced Polymer Sheets, Journal of Structural Engineering, ASCE, Vol.129, Issue 6, pp.717-724, 2003.
3	Yuichi Sato, Katsuhiro Nagatomo and Yoshifumi Nakamura: Bond-Strengthening Hooks for RC Members with 1300 MPa-Class Shear-Reinforcing Spirals, Journal of Asian Architecture and Building Engineering, Vol.2, No.2, Nov. 2003, pp.7-14.
4	HuneBum Ko and Yuichi Sato: Analysis of FRP-Strengthened RC Members with Varied Sheet Bond Stress-Slip Models, Journal of Advanced Concrete Technology, 2(3) 317-326, 2004.
5	Yuichi Sato, Katsuhiro Nagatomo and Yoshifumi Nakamura: Bond-Strengthening Hooks for RC Members with 1300 MPa-Class Shear-Reinforcing Spirals Part II: Shear Strength Estimation Based on the BCJ-C1166 Guideline, Journal of Asian Architecture and Building Engineering, Vol. 5, No. 2 pp.317-324, 2006.
6	HuneBum Ko and Yuichi Sato: Bond Stress-Slip Relationship between FRP Sheet and Concrete under Cyclic Load, Journal of Composites for Construction, ASCE, Vol.11, No. 4, August 1, 2007.
7	Yuichi Sato and HuneBum Ko: Experimental investigation of conditions of lateral shear reinforcements in RC columns accompanied by buckling of longitudinal bars, International Journal for Earthquake Engineering and Structural Dynamics, 2007; DOI: 10.1002/eqe.712.
8	Yuichi Sato and Kazuhiro Naganuma: Discrete-like crack simulation by smeared crack-based FEM for reinforced concrete, International Journal for Earthquake Engineering and Structural Dynamics, 2007; DOI: 10.1002/eqe.720.
9	Yuichi Sato and Hunebum Ko: Modeling of Reinforcement Buckling in RC Columns Confined with FRP, Journal of Advanced Concrete Technology, Vol.6, No.1, pp.195-204, 2008.
10	Yuichi Sato, Shinichi Yagi, Katsuhiro Nagatomo and Yoshifumi Nakamura: Bond-Strengthening Hooks for RC Members with 1300 MPa-Class Shear-Reinforcing Spirals Part III: Bond Strengths of Double-Layered Longitudinal Bars and Cut-Off Bars, Journal of Asian Architecture and Building Engineering, Vol. 7, No. 2, pp.347-354, 2008.
11	Yuichi Sato, Katsuhiro Nagatomo and Yoshifumi Nakamura: Experimental Study on Bond-Strengthening Hooks for RC Beams, Journal of Advanced Concrete Technology, Vol.7, No.2, pp.263-271, 2009.
12	Yuichi Sato, Shinichi Kajihara and Yoshio Kaneko: Analytical study of performance evaluation for seismic retrofitting of reinforced concrete building using 3D dynamic nonlinear finite element analysis, Earthquake Engineering and Engineering Vibration, Vol. 10, No. 2, pp.291-302, June 2011; DOI: 10.1007/s11803-011-0066-0
13	Yuichi Sato, Toshiyuki Kanakubo and Hiroshi Shima: Double-Counting Problem of FEA with Simultaneous Use of Bond Link Elements and Tension-Stiffening Model, Journal of Advanced Concrete Technology Vol. 11, 206-214, August 2013.
14	Yuichi Sato and Kazuhiro Naganuma: Discrete-Like Crack Simulation of Reinforced Concrete Incorporated with Analytical Solution of Cyclic Bond Model, Journal of Structural Engineering, ASCE, Vol.140, Issue 3, March 2014; DOI: 10.1061/(ASCE)ST.1943-541X.0000864.
15	Hunebum Ko, Stijn Matthys, Aniello Palmieri, and Yuichi Sato: Development of a simplified bond stress–slip model for bonded FRP–concrete interfaces, Construction and Building Materials, Vol. 68, Issue 15 October 2014, pp.142–157; DOI: 10.1016/j.conbuildmat.2014.06.037
16	Sunhee Hong, Yuichi Sato, Yoshio Kaneko and Shinya Kimura: Prediction of Drying Shrinkage Cracking of Eco-efficient Steel Chip Reinforced Cementitious Composite Considering Tensile Creep, Journal of Advanced Concrete Technology Vol. 13, 393-402, August 2015, DOI: 10.3151/jact.13.393.
17	Yuika Ida, Sunhee Hong, Shinya Kimura, Yuichi Sato, Yoshio Kaneko: Prediction of Drying Shrinkage Cracks of Steel Chip Reinforced Polymer Cement Mortar, Advanced Concrete Technology Vol. 14, 739-752, December 2016, DOI: 10.3151/jact.14.739.
18	Takahiro Chujo, Hiroshi Yoshikado, Yuichi Sato, Kazuhiro Naganuma, Yoshio Kaneko: Experimental and Analytical Investigations of Seismic Pounding of Adjacent 14-Story Reinforced Concrete Buildings Damaged in 1985 Mexico Earthquake, Advanced Concrete Technology Vol. 14, 753-769, December 2016, DOI: 10.3151/jact.14.753.
19	Koki Makita, Yoshifumi Uda, Hiroshi Yoshikado, Koji Mori, Yuichi Sato, Kazuhiro Naganuma, Yoshio Kaneko: Drop-Weight Test For RC Frame Made Of Polypropylene Fiber-Reinforced Concrete, Advanced Concrete Technology Vol. 16, 36-45, January 2018, DOI: 10.3151/jact.16.36.
20	Yuichi Sato, Kazuhiro Naganuma, Hunebum Ko and Yoshio Kaneko: Drop-Weight Impact Loading of Polypropylene Fiber Reinforced Concrete Wall after One-Year Drying Shrinkage, Advanced Concrete Technology Vol. 18, 794-807, December 2020, DOI: 10.3151/jact.18.794.
21	Yuichi Sato and Kazuhiro Naganuma: Crack Width Analyses of 50-Story Reinforced Concrete Building by Parallelized Discrete-Like Crack Model, Journal of Structural Engineering, ASCE, Vol.150, Issue 6, March 2024; DOI: 10.1061/JSENDH.STENG-12446.

Conference Papers

1	Y. Sato, S. Fujii and S. Morita: Study on Fundamental Characteristics of Carbon-Fiber-Mesh Reinforced Mortar Plates, Transactions of the Japan Concrete Institute, Vol.16, pp.197-204,1994.
2	Y. Sato, K. Kimura and Y. Kobatake: Interfacial Fracture Simulation for CFRP Sheet and Concrete, Proceedings of Recent Advancement of Interfacial Materials Science on Composite Materials '96, pp.306-309, 1996.5.
3	Y. Sato, K. Kimura: Seismic Resistant Retrofitting of Reinforced Concrete Buildings by Carbon Fiber, Proceedings of Joint Canada-Japan Workshop on Composites, p24, 1996.8.
4	Y. Sato, H. Katsumata, Y. Kobatake: Shear Strengthening of Existing Reinforced Concrete Beams by CFRP Sheet, Proceedings of the Third International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.507-514, 1997.10.
5	Y. Sato, K. Kimura, Y. Kobatake: Analysis of Bond Behavior between CFRP Sheet and Concrete, Proceedings of the Fifth Japan International SAMPE (Society for the Advancement of Material and Process Engineering) Symposium, pp.1447-1452, 1997.10.
6	Y. Sato and S. Fujii: Behavior of Fiber-Mesh-Reinforced Mortar Shear Panel and Its Bond Performance, Selected Presentation Proceedings of the Fourth International Symposium on FRP Reinforcement for Concrete Structures, pp.23-34, 1999.10.
7	Y. Sato, S. Fujii, Y. Seto and T. Fujii: Structural Behavior of Composite RC Members Encased by Continuous Fiber-Mesh Reinforced Mortar Permanent Forms, Proceedings of the Fourth International Symposium on FRP Reinforcement for Concrete Structures, pp.113-124, 1999.10.
8	Y. Sato and K. Naganuma: Crack Tracing Process for Smeared-Crack-Based Nonlinear FEM, Proceedings of the Third International Conference on Urban Earthquake Engineering, Center for Urban Earthquake Engineering, Tokyo Institute of Technology, pp.325-332, 2006.3.
9	Y. Sato and K. Naganuma: Discrete-like Crack Simulation by Smeared Crack-based FEM --Reinforced Concrete Wall Subjected to Shrinkage, Proceedings of Bond in Concrete 2012, Vol. 1, Brescia, Italy, pp. 193-200, June 19, 2012.
10	Y. Sato, H. Shima and T. Kanakubo: Japan Concrete Institute TC Activities on Bond Behavior and Constitutive Laws in RC (Part 1 Research Survey on Bond Problems), Proceedings of Bond in Concrete 2012, Brescia, Italy, Vol. 1, pp. 89-96, June 2012.
11	T. Kanakubo, Y. Sato, Y. Uchida, K. Watanabe and H. Shima: Japan Concrete Institute TC Activities on Bond Behavior and Constitutive Laws in RC (Part 3 Application of Constitutive Laws for FEA), Proceedings of Bond in Concrete 2012, Brescia, Italy, Vol. 1, pp. 105-112, June 2012.
12	Sun-Hee Hong, Shinya Kimura, Yuichi Sato and Yoshio Kaneko: “Study on drying shrinkage cracking characteristics of steel chip reinforced cementitious composite” Proceedings of The 2013 World Conference on Advances in Structural Engineering and Mechanics (ASME13), Jeju, Korea, pp.432-443, 2013
13	Sunhee HONG、Shinya KIMURA、Yuichi Sato、Yoshio Kaneko: “Experimental study on free and restrained shrinkage of steel chip reinforced cementitious composite” Proceedings of international symposium on environmentally friendly concrete – Eco-Crete, Reykjavik, Iceland, pp.155-162, 2014.
14	Yuika Ida, Hong Sunhee, Shinya Kimura, Yuichi Sato, and Yoshio Kaneko: Prediction of drying shrinkage cracks of steel chip reinforced polymer cement mortar. Proceedings of the 9th RILEM International Symposium on Fiber Reinforced Concrete (BEFIB 2016) Vancouver, BC, Canada. Edited by: N. Banthia, M. di Prisco, S. Soleimani-Dashtaki, September 19–21, 2016.
15	SATO Yuichi, NAGANUMA Kazuhiro and KANEKO Yoshio (2020) Drop weight test of polypropylene fiber reinforced concrete wall after one-year drying shrinkage, Proceedings of 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper No. 2i-0007.
16	KITAZAWA Keisuke, SATO Yuichi, NAGANUMA Kazuhiro and KANEKO Yoshio (2020) Finite Element Analyses of Seismic Response of a 22-story RC Wall Building subjected to Drying Shrinkage Cracking and Application of SCRPCC. FIB BULLETIN NO. 95: Fibre Reinforced Concrete: From Design to Structural Applications. Proceedings of the ACI-fib-RILEM International Workshop - FRC2018, ISBN: 978-2-88394-142-7, Paper No. 28, doi.org/10.35789/fib.BULL.0095.Ch28
17	SATO Yuichi, NAGANUMA Kazuhiro and KANEKO Yoshio (2022) Parallelism for NLFEM for RC incorporated with bond redistribution procedure, Proceedings of 5th International Conference, Bond in Concrete 2022, Stuttgart, Germany, 25th-27th July 2022, pp.105-116.